ChinaEffects® Flame Projector Stage Effects Show Fire Machine 4 Colors

Feature
This Flame Projector compact and budget flame projector can hold two flame oil cans, and can be controlled by either a DMX512 console or simply the power switch; the effects produced by multiple flame projectors are very impressive!
(note: you can only shoot both cans together and not one by one and you get a higher flame this way.)

Specification
Power: AC110V 10% 50HZ - 60HZ
Output: 70W
Flame height: 3-13 FT (1-4M, highest when using two cans together and project simultaneously)
Flame covering area: about 1 square meter (or 1 square yard)
Gross weight: 15 lbs (7 kg)
Control mode: DMX512 console or power switch
Flame oil NOT included;

Instructions/Cautions
--Place the flame projector in the way that the  projecting nozzle faces upward;
--Open the cover for the flame oil compartment  and place flame oil cans inside; make sure the nozzle of the flame oil can  must be connected to the lower end of the flame projecting nozzle inside the  projector in order to prevent oil leaks;
(note: please do NOT lose the small washer  inside the projector which is used to help prevent oil leaks)
--Use either a DMX512 console or a power switch  to control this flame projector;
--Cleaning: use yellow flame oil to project flames 2-3 times after each use; wipe with a clean cloth every part of the projector before storing in a sealed box;

CAUTIONS: REAL FIRE! CAN CAUSE DAMAGE AND/OR  DAMAGE!!
--SPACE REQUIREMENT: 20ft+ high and 26ft+ in  diameter; no combustible objects in surrounding area;
--KEEP YOUR DISTANCE: never get close to the  projector once the power is connected and never look straight into the projector nozzle;(Detailed instructions in English included in  package)